Models

This is a list of all the models of boats in our system, ordered by the last time they were updated. You can use the filters below to sort the boats to only what you want. You must log in in order to add a new model or edit existing ones.

Model Name Description Last Updated
Sanger Junior Shovelnose Hydro, 2nd Gen.

Second generation Sanger Junior shovelnose hydro. First one out of the mold was for Jack Davidson's own Climax, second out was for Vern Kinman's Crucifier III.

2014-04-28 15:17
Sanger Junior Shovelnose Hydro, 1st Gen.

First generation of the Sanger Junior shovelnose hydro.

2014-04-28 15:15
Nordskog Viking Nordskog Viking

The Nordskog Viking was built in limited numbers in the late 60s for endurance racing. The featured a large number of innovative features.

2014-04-21 15:00
D&D Marine 17'8" Flatbottom

D&D Marine built a flatbottom mold in the late 1960's/early 1970's that was highly influenced by the Hondo flatbottom design at the time. It was alleged that the last 43 inches of their boat was a direct splash of the Hondo flatbottom and everything forward of that was their design. The D&D hull was a little pointer in the bow than the Hondo and two inches shorter in length (D&D 17 ' 8 " vrs Hondo 17 ' 10 "). D&D hulls were produced in limited numbers as ski boats.

2014-04-21 09:10
Cole TR4

The Cole TR4 had an all-new bottom design compared to it's predecessors, but also had a new top deck design. This top deck was later combined with the TR2 bottom to make the TR6.

2014-04-18 16:22
Cole TR3

The prototype TR3 that Jeff Bruns dominated BGF with was designed soley by me from the ground up. After experimenting with some TR1's and finding that the additional rocker in them made them very fast, I put 1/4" masonite in the mold and built 2 boats. One of them was the prototype and the second was the plug. Unfortunatly...I did not build the plug for the TR3 mold it was built soley by George. Not that he did a bad job...the where just not the same.

2014-04-18 16:19
Charger Flatbottom (Unknown)

Placeholder for an unknown model of Charger flatbottom.

2013-11-22 08:06
Mize Hydro Mize Hydro

Had a full tunnel underneath and a T-deck.

2013-11-02 14:13
Schiada 20' Cruiser

This may not be an actual model name.

2013-11-01 15:51
Spitfire (Unknown)

Placeholder for an unknown model of Spitfire boat.

2013-11-01 15:43
Cole (Unknown)

Placeholder for an unknown model of Cole.

2013-11-01 15:39
Hallett 19' Flatbottom

Produced by Barron Boat Works

2013-10-17 12:27
Aquacraft (Unknown)

Placeholder for an unknown model of Aquacraft.

2013-10-12 18:19
Homebuilt Flatbottom

This is a placeholder for any homebuilt flatbottom hull. These often pop up with custom one-off purpose built record setting or racing hulls.

2013-10-08 15:30
Cole Firestar pictured center Cole Firestar

Pantera bottom (semi-V), built with outboard, jet, or v-drive from the factory. Possibly a splash of the Hondo Pantera 18'.

2013-10-05 19:39
Hondo Pantera 18' T-Jet Hondo Pantera 18' T-Jet 2013-10-05 19:38
Sanger 21' Shovelnose Hydro

This was an extra-large shovelnose hydro, designed for massive power.

2013-10-03 09:29
Hondo Flatbottom (Unknown)

This is a placeholder for an unknown model of Hondo flatbottom.

2013-10-03 08:54
Daytona Sprint

Circle racing flatbottom built by Daytona. Based on the Biesemeyer design.

2013-09-23 19:38
Daytona Flatbottom (Unknown)

Placeholder for an unknown model of Daytona flatbottom.

2013-09-23 19:30